Henry Turrell
Oliver Townsend
As well as the obvious protection from shock absorption, the jacket distributes pressure and, above all, effectively makes the spine column rigid so that the neck and trunk have limited movement.
For your protection, a simple “click” is all it takes to connect you to the saddle. If you are unseated or thrown from a horse the airbag system is designed to be effective in 0.2 seconds
The coiled wire of the jacket connects with the holding strap placed at the saddle. After the rider has mounted the saddle, he or she clips the 2 ends together. The coiled wire enables full movement in all directions for the rider. The airbag will only be activated if the rider is separated from the horse. The airbag jacket will then inflate within 0.2 seconds, protecting the all important areas of the body, the neck, ribs and coccyx.
For your protection, a simple “click” is all it takes to connect you to the saddle. If you are unseated or thrown from a horse the airbag system is designed to be effective in 0.2 seconds
The coiled wire of the jacket connects with the holding strap placed at the saddle. After the rider has mounted the saddle, he or she clips the 2 ends together. The coiled wire enables full movement in all directions for the rider. The airbag will only be activated if the rider is separated from the horse. The airbag jacket will then inflate within 0.2 seconds, protecting the all important areas of the body, the neck, ribs and coccyx.
The new system starts to operate in 0.1 of a second, so inflation begins in less than 1 meter of a drop.
Reusable after simple replacement of the CO²
gas cartridge.
Reusable after simple replacement of the CO²
gas cartridge.
The highly resistant polyester fabric Jacket or Gilet is washable once the airbag has been removed.
STEP 1
Unscrew the used C02 cartridge by turning anti clockwise.
Unscrew the used C02 cartridge by turning anti clockwise.
STEP 2
Remove all the remaining C02 from the jacket by pressing down with your hands and slowly pushing out.
DO NOT fold or roll as this may cause internal damage.
Remove all the remaining C02 from the jacket by pressing down with your hands and slowly pushing out.
DO NOT fold or roll as this may cause internal damage.
STEP 3
Insert a “setting bolt” into the hole at the bottom of the “key box” and tighten up by hand.
Insert a “setting bolt” into the hole at the bottom of the “key box” and tighten up by hand.
STEP 4
Then tighten further with the allen key provided until the hole for the “key ball” with a ring in the aluminium cylinder is placed at the centre of the hole of the “key box”.
Then tighten further with the allen key provided until the hole for the “key ball” with a ring in the aluminium cylinder is placed at the centre of the hole of the “key box”.
STEP 5
Insert the “key ball” with the ring into the hole of the “key box”
Insert the “key ball” with the ring into the hole of the “key box”
STEP 7
Place a new C02 cartridge into the “key box” by screwing it in until it will go no further.
Place a new C02 cartridge into the “key box” by screwing it in until it will go no further.
